• 2021-08-12 05:01:00

1.The slewing bearing must be carefully installed and removed.2.The transportation and storage should be placed horizontally, and the storage must be placed in a dry room.3.Lifting should be done with lifting ring screws in a horizontal way, and do not collide, especially in the radial direction.4. The outer surface of the slewing bearing is coated w...

• 2021-03-03 02:29:00

Slewing bearing is widely usedFirst of all, it is mainly used in the construction machinery industry, such as earthmoving machinery, excavators, etc.In addition, swivel supports are also used in the following machines:Concrete machinery, feeding machinery, lifting machinery, etc.In addition to being used in various construction machinery, the scope o...

• 2021-02-19 06:31:00

1. Installation plane: It is required to be smooth and free of debris. At the same time, the plane error and longitudinal error of the installation surface have certain standard values, and the installation must be strictly up to the standard.2. Rigidity of the support: When installing, read the installation instructions in detail, or operate it by p...

• 2020-11-12 06:40:00

1. Connect the outer ring of the slewing bearing to the upper vehicle, and the inner ring to the lower vehicle.2. Clean the sealing ring and put it away, use a crane to separate the equipment, and then take out the screws and bolts on the slewing bearing.3. After taking out all the steel balls and isolation sleeves, check the steel balls and isolatio...

• 2020-10-16 09:44:00

1. Refill with suitable grease as needed.2. Maintain a good lubrication state and keep records. When using in dusty and humid areas, it should be lubricated at least once a week according to the specific situation.3. Sufficient preload must be maintained.4. The tooth surface of the slewing bearing should be cleaned every 8-10 working days.