• 2020-11-12 06:40:00

1. Connect the outer ring of the slewing bearing to the upper vehicle, and the inner ring to the lower vehicle.2. Clean the sealing ring and put it away, use a crane to separate the equipment, and then take out the screws and bolts on the slewing bearing.3. After taking out all the steel balls and isolation sleeves, check the steel balls and isolation s...

• 2020-11-12 06:40:00

1. Connect the outer ring of the slewing bearing to the upper vehicle, and the inner ring to the lower vehicle.2. Clean the sealing ring and put it away, use a crane to separate the equipment, and then take out the screws and bolts on the slewing bearing.3. After taking out all the steel balls and isolation sleeves, check the steel balls and isolation s...

• 2020-10-16 09:44:00

1. Refill with suitable grease as needed.2. Maintain a good lubrication state and keep records. When using in dusty and humid areas, it should be lubricated at least once a week according to the specific situation.3. Sufficient preload must be maintained.4. The tooth surface of the slewing bearing should be cleaned every 8-10 working days....

• 2020-09-17 06:48:00

Slewing bearings have unique bearing characteristics and are usually used in hoisting machinery, excavators, turntables, wind turbines, telescopes, and tank turrets. Through the improvement of processing methods and the renewal of design concepts, today's slewing bearings can be applied to smaller, more complex and more precise occasions....

• 2020-08-17 08:52:00

1.allowable speedIn general, bearings with low friction and less divergence allow for high conversion.2.rigidity:In the bearing support design, considering the combination and arrangement of the bearings can also improve the bearing support stiffness.3. Alignment performance and installation errorSelf-aligning bearings can overcome defects caused by ins...